Minolta EPI 054 - Cleaning of the Fusing Thermistor; Cleaning of the Upper Fusing Roller; Cleaning of the Upper Paper Separator Fingers; Removal of the Lower Fusing Roller

FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 DIS/REASSEMBLY, ADJUSTMENT
98.04.13
D-43
(4) Cleaning of the Upper Fusing Roller
(5) Cleaning of the Upper Paper Separator Fingers
(6) Cleaning of the Fusing Thermistor
(7) Removal of the Lower Fusing Roller
1. Using a soft cloth dampened with alcohol or sili-
cone oil, wipe clean the Upper Fusing Roller.
1139D198AA
1. Using a soft cloth dampened with alcohol or sili-
cone oil, wipe clean the Upper Separator Fingers.
1139D199AA
1. Remove one screw to remove the Fusing Ther-
mistor.
2. Using a soft cloth dampened with alcohol or sili-
cone oil, wipe clean the Thermistor.
1151D039AA
1. Turning it in the direction of the arrow, remove the
Lower Separator Fingers Unit.
1139D201AA