Minolta IIIF - Page 20

ANALYZE FUNCTION: MEASURING ONLY FLASH IN MIXED LIGHTING
By using the Color Meter IIIF’s analyze mode, the photographic color temperature of only the
light from the flash or the filtration required for the flash alone can be determined without the influence
of the ambient light.
To take measurements in analyze mode, follow the procedure for flash measurements with a sync
cord (see p. 14) or without a sync cord (see p. 16), but set the shutter speed to “F” (the setting
above 1/500 sec.). The effective shutter speed when “F” is set is 1/15 sec.
bea
et