Minolta IIIF - Page 5

10
11
12
13
14
Receptor diffuser
Data panei
POWER button
Switches power on and off.
Memory channel (M-CH) button
When held pressed, allows memory channel to be selected using up/down control.
Memory (M) button
When held pressed, allows data in memory to be changed using up/down control.
Sync terminal
For connecting flash sync cord.
Measuring button
Takes measurements.
Measuring-mode switch
Selects measuring mode:
“AMBI”: ` Ambient light measurements (see p. 13)
“CORD”: Flash measurements with a sync cord (see p. 14)
“NON.C”: Flash measurements without a sync cord (see p. 16)
Up/down control
* Adjusts shutter speed in “CORD” or "NON CT measuring modes.
* Adjusts memory channel when used with memory channel button.
* Adjusts data in memory when used with memory button.
DISPLAY button
Changes display mode in the following order:
… ~LB/CC indexes - LB filter number/CC index Photographic color temperature >
LB/CC indexes...
Flash-range switch
Selects measuring range for flash measurements:
Lo: f/2,8 to 22 (approx.)
Hi: f/22 (approx.) to 180
*The Lo and Hi ranges overlap by approximately 1EV.
Film-type switch
Selects film type:
B: Type-B tungsten film balanced for 3200K
A: Type-A tungsten film balanced for 3400K
D: Daylight film balanced for 5500K
Filter tables
Battery-chamber cover