Minolta IIIF - Page 6

I
acc. iG; +
aaa {ons \
Display-mode indications
Measuring-mode indications
Indicate selected measuring mode.
“TIME” display (Not displayed in “AMBP? measuring mode)
Indicates shutter speed for flash measurements in fractions of a second (for 1 second, value is
followed by ‘‘S’’); “F” indicates flash analyze function (see p. 18).
Measured values/stored correction value
Memory-channel display (Not displayed if memory channel 0 selected)
Indicates selected memory channel.
Over-/Under-range indications
A indicates measurement is over the measuring or display range.
W indicates measurement is under the measuring or display range.
Flash-range indications (Not displayed in “AMBI”? measuring mode)
Indicates selected flash measuring range.