5. When the Paper Misfeed Indicator Lights Up
4-12
MSP 3000 Printer
Chapter 4
Clearing a Misfeed from inside
the Printer
1
Open the Upper Unit by pulling the
Upper Unit Lock Release Lever
forward.
NOTE
Push the Print Tray in before opening the
Upper Unit.
2
Remove the Imaging Cartridge.
NOTE
Be sure to cover the Imaging Cartridge
with a heavy cloth to protect it from light
when it is removed from the Printer.
3
If the misfeed occurred before the
sheet of paper entered the Fusing
Unit, gently pull the misfed sheet up
and out as shown.
4
If the misfeed occurred after the sheet
of paper entered the Fusing Unit,
gently pull the misfed sheet toward
you and out as shown.
NOTE
• Since the toner has not yet been fixed
onto the sheet of paper, be careful not to
soil your hands or clothes when pulling
out the misfed sheet.
• Do not remove the misfeed by pulling on
the sheet of paper toward the output end
of the Fusing Unit as shown.
5
Reinstall the Imaging Unit and close
the Upper Unit.
To Next Page
Loading...