Minolta MS6000 MK II - Loading Paper in the Paper Cassette

3. Set the Paper
3-6
MSP 3500 Printer
Chapter 3
Loading Paper in the Paper
Cassette
1
Pull out the paper cassette until it
stops.
2
While pressing the release buttons
(one on each side) ➀, remove the
paper cassette
➁.
3
Remove the cassette cover.
4
Lift up the gray lever on the right end
of the paper retainer ➀, and then
slide the paper retainer to the right
➁.
5
Lift up on the left end of the paper
retainer to remove it.
6
Insert the right end of the paper
retainer ➀ into the slot for the size of
paper to be loaded
➁.
The paper size detected depending on
the position of the paper retainer.
Correctly position the paper retainer
according to the size of paper to be
loaded.