Minolta MS6000 MK II - Selecting the Connection Mode

2-36
Scanner
Chapter 2
19. Selecting the Connection Mode
The Scanner connection can be selected between PR (connection to the Printer) and PC (con-
nection to the PC).
* For the connection to the PC, the optional interface kit is required.
1
Hold down the Shift Key and the PC/PR Key together for over one second.
PC/PR
Shift
PC mode: When the display is switched from Multi-Print to PC, the connection
to the PC is valid.
PR mode: When the display is switched from PC to Multi-Print, the connection
to the Printer is valid.