EasyManua.ls Logo

Minolta MS6000 MK II - Printer Cleaning and Roller Maintenance

Minolta MS6000 MK II
136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1. System Care
6-3
Maintenance
Chapter 6
Cleaning the System Printer (Option)
Clean the Printer at regular intervals.
Cleaning the MSP 3500 Printer
When does the printer need cleaning?
Clean this item thoroughly... After...
Exterior Once a month or as needed, whichever
comes first.
Interior (paper feed rollers) Paper stops being fed from the paper
tray(s).
Note: We recommend that you do not clean elsewhere inside the printer.
If necessary, contact the authorized dealer.
What cleaning materials should I use?
ExteriorUse ExteriorAvoid
A soft dry cloth to clean the control panel. Sharp or rough implements (such as wire
or plastic cleaning pads or brushes); liq
-
uids.
A soft, wrung-out damp cloth to clean the
outside of the printer.
Aerosol or pump-sprayed cleaners; too
much dampness in the cloth.
Mild neutral detergent to clean the outside
of the printer, if necessary.
Abrasive or corrosive solutions that con-
tain solvents (such as alcohol, benzine, or
thinners).
Interior Paper Feed RollersUse InteriorAvoid
A soft dry clean cloth. Sharp or rough implements (such as wire
or plastic cleaning pads or brushes); any
liquids.

Table of Contents

Other manuals for Minolta MS6000 MK II