1. System Care
6-5
Maintenance
Chapter 6
Paper Pickup Rollers
The printer's pickup rollers contain a sensor to detect the density of media passing by.
How do I clean the paper feeding tray pickup rollers?
1
Turn off the printer.
2
Open the top cover.
ATTENTION
Never touch the copper or brass electrodes ➀ or electrical parts that are located inside the
top cover and underneath the toner cartridge, as a printer malfunction can result.
Be careful not to touch ➁ around the image transfer roller (touching certain parts in this
area may result in reduced print quality) or
➂ around the fusing unit (since the inside
reaches temperatures of about 392
°F (200 °C), touching any part in this area may result in
burns).
To Next Page
Loading...