Minolta MS6000 MK II - Film Type, Density, and Output Settings

2-24
Scanner
Chapter 2
10. Selecting the Film Type
Auto
1
The system will automatically
determine the polarity of the film
being used when Auto is selected
with the Film Type key.
Nega/Posi
Film Type
Auto
Nega
Posi
NOTE
• The system cannot determine the
polarity of certain types of film. Should
this occur, the film type should be
selected manually.
• The system does not detect exterior
conditions such as when the glass
surface of the Carrier is dirty or
scratched.
Nega (negative film)
1
If negative film is to be used, press
the Film Type Key to select Nega.
Nega
Film Typ
e
Auto
Nega
Posi
Posi (positive film)
1
If positive film is to be used, press the
Film Type Key to select Posi.
Posi
Film Typ
e
Auto
Nega
Posi