3-5
MSP 3500 Printer
Chapter 3
3. Set the Paper
Loading Paper into the Paper
Feeding Tray
1
Open the paper feeding tray.
2
Fan a stack of paper.
3
Align the edges of the paper, and then
load it with its printing-side up.
Often, an arrow on the paper package
label indicates the printing-side of the
media.
ATTENTION
Do not load paper above the fill limit
mark on the inside left of the tray, or it
may not feed correctly.
The paper feeding tray holds
approximately 200 sheets of 20 lb bond
(75 g/m
2
) paper.
4
While pressing the button on the right
side of the media guide ➀, slide the
media guide to adjust it
➁.
ATTENTION
Make sure the paper fit easily between the
guides. Improperly adjusted guides may
cause poor print quality, paper jams, or
printer damage.
To Next Page
Loading...