Safety Information (MSP 3500 Printer)
viii
OZONE RELEASE (For all Users)
During printer operation, a small quantity of ozone is released. This amount is not large
enough to cause any adverse affects or harm. However, be sure the room where the machine
is being used has adequate ventilation, especially if you are printing a high volume of materi
-
als, or if the machine is being used continuously over a long period.
WARNING LABEL
• A laser safety label is attached to the outside of the machine as shown below.
CLASS 1 LASER PRODUCT
LASER KLASSE 1 PRODUKT
To Next Page
Loading...