14
Connect supply pipe. Do not
overtighten!
Feed cable into Case. Fit Earth
sleeve (not supplied) and strip
insulation.
Do not twist cable cores.
Firmly connect the conductors. Do
not exert strain on the terminal
block.
Make sure wires are clear of all
mounting holes.
Ret the Service Tunnel and Cover.
Make sure they t correctly.
Do not overtighten screws.
Do not use alternative screws to
secure the Cover. This can cause
internal damage to the appliance.
Do not seal around the back of
appliance.
L = BROWN
E = GREEN
N = BLUE
10. 11.
12.
13.
14. 15.