Mircom FX-2003-6DS User Manual

19
Mechanical and Chassis Installation
4.2 Chassis Installation
Chassis Installation Instructions for the following:
• FX-2003-6DS
• FX-2003-12DS
• FX-2003-12XTDS
• FX-2009-12DS
• FX-2009S-12DS
• FX-2017-12ADS
• FX-2017S-12ADS
• ECX-0012
For proper chassis installation do the following
1. Group the incoming wires through the top of the enclosure to prepare it for wiring the
modules. Do not run the wires in-between the modules since it could cause a short
circuit.
2. Use a wire tie to group wires for easy identification and neatness.
3. Be sure to connect a solid earth ground (from building system ground / to a cold water
pipe) to the chassis earth ground mounting lug, and to connect the earth ground wire
lugs from the main chassis to the ground screw on the backbox.
4. Mount chassis using the supplied hex nuts.

Mircom FX-2003-6DS Specifications

General

Brand	Mircom
Model	FX-2003-6DS
Category	Control Panel
Language	English