TX3 Configurator Software Guide
LT-973 11
Phone #. Provide a telephone number to dial.
Extra initialization commands. Provide any extra modem
initialization commands. The characters "AT" are automatically
added before the initialization commands.
6. Click Advanced. The Advanced Network Setup window appears.
7. Enter the required parameters as explained below:
Network passcode. The network passcode is used for logging into
each panel. All panels on the network must use this passcode as their
highest level passcodes.
Timeout. The timeout is the time the software will wait for each
panel to respond to a communication command. Increasing this value
may help when there are many communication errors.
8. See Opening and Creating a Job File on page 12.
To Next Page
Loading...
