TX3 Configurator Software Guide
LT-973 23
To delete one or more residents
1. Right click one or more residents and then select Delete. Pressing
Del key will achieve the same purpose.
2. Click Yes to delete a resident and return to the configuration
window, or click No to exit without saving the changes.
To find a resident
1. Enter the person's name in the Find box. The list automatically
refreshes as you type. To refine the search, select a parameter from
the column list.
2. Press the Clear button to restore the list back to its full state.
Sending a Job
Once panel connectivity is established, you can send the current job
configuration to the panel.
To send to a single panel
1. Right click on a panel in the job tree and select Send to Single
Panel.
To send to all panels
1. Click Send from the Menu Bar.
Getting a Job
A Job can be created by reading the configuration information from the
panel.
To Next Page
Loading...
