Mircom TX3 Series - Page 18

18 LT-973
2. To edit a resident’s information, click its row header on the far left or
double click elsewhere on the row. You may also right click and
select Edit Resident. The Resident Details window appears.
3. Provide the following information:
Name. Enter the resident’s name.
Dial code. Enter the resident’s dial code.
Apt#. Enter the apartment or suite number.
Hide from directory. Check this box to hide the resident’s name
from the panel directory.
4. Select Phone lines and provide the following information to
determine which panels will have telephone access:
Lobby Unit. Each lobby unit is shown in a list.
Phone Line. From the list select the telephone line for each lobby unit
(NSL, ADC or not connected).