Mirion Technologies RDS-30 User Manual

3(21)
Introduction
The RDS-30 is a Digital Handheld Dose Rate Meter designed for use by personnel who
may be exposed to gamma and/or X-ray radiation in their work. RDS-30 provides
sequential alarms for fixed dose rate values (programmable by configuration software
(CSW) via IrDA link) and the possibility to store dose rate events into the histogram
memory of the meter. The use of a CSW software is required for downloading the data
into a PC via IrDA port.
RDS-30 is microprocessor controlled. The user interface consists of one push button and
an easy-to-use menu structure that displays information in the LCD of the meter. The
push button gives a beep each time it is pressed. To complete an action, release the
button or press again (beep) and hold the button down until a second beep is audible.
The six-digit display shows the dose rate and various messages. Different alarm
situations are indicated by a combination of audio-visual effects in the LCD and a buzzer
(dose rate 1, dose rate 2, low battery, defect, dose rate overflow).
The RDS-30 is ready for use after the batteries (2 x IEC LR06/AA) have been installed.
RDS-30 Front view
Push Button
IrDA link
Battery Cover

Mirion Technologies RDS-30 Specifications

General

Brand	Mirion Technologies
Model	RDS-30
Category	Measuring Instruments
Language	English