Mitel 3300 - Remote Call Forwarding; Call Forward End Chaining

OpenPhone 27 Handset User Guide
Page 30
To forward calls from a remote station to your current location (Call Forward – Remote):
1. Long press the
key.
2. Press No until “Call Forwarding?” appears.
3. Press Yes.
4. Press Next until “I Am Here” appears.
5. Press Yes.
6. Dial the extension of the remote station.
7. Press Save.
To cancel Call Forward - Remote from the station that set the remote forwarding:
1. Press
.
2. Dial the Cancel Call Forwarding Follow Me – Remote feature access code.
3. Dial the extension of the remote station.
4. Press
.
To cancel Call Forward - Remote from the station that was forwarded:
1. Long press the
key.
2. Press No until Call Forwarding? appears.
3. Press Yes.
4. Press Review.
5. Press Change.
6. Press TurnOff.
7. Long press the
key.
To ensure that calls do not get forwarded again at the destination extension
(Call Forward - End Chaining):
1. Press
.
2. Dial the Call Forwarding - End Chaining feature access code.
3. Press
.
To again allow calls to be forwarded by the destination number:
1. Press
.
2. Dial the Cancel Call Forwarding - End Chaining feature access code.
3. Press
.