Mitel 3300 - Page 33

OpenPhone 27 Handset User Guide
Page 33
To set or change a password:
You can program a password to prevent access to your callback messages. If you set a
password, you will need to enter it in order to check your messages from another phone. To set
or change a password:
1. Long press the
key.
2. Press No until “Set Password?” appears.
3. Press Yes.
4. Do one of the following:
• To enter a new password, enter your password (up to 7 digits, not including 0).
• To change or clear your password, enter your current password.
5. Press Enter.
6. Long press of the
key.
To clear a password:
1. Long press the
key.
2. Press No until “Set Password?” appears.
3. Press Yes.
4. Enter your current password.
5. Press Enter.
6. At the "New password" prompt, dial 0.
7. At the "Verification" prompt, dial 0.
8. Long press the
key.
For steps on how to cancel a Callback – Messaging indication that you have left on a set, see
Callback on page 31.