Keys, display, and menu guidance
Mitel 6920 SIP 19
eud-1763/2.0 – R6.0 – 06.2018
Function key configuration (default key setting) -
Overview
The phone on the MiVoice Office 400 communication system is delivered
with the default function key configurations summarized in the following
table. Note that your system administrator might change the default config-
uration and your phone configuration might therefore differ from the default
configuration.
Overview alphanumeric keyboard
The alphanumeric keyboard has a dialpad with digits from 0 through 9, a *
key, and a # key. Of these, keys 2 through 9 contain letters of the alphabet.
These dialpad keys can be used for entering digits, password, text, and
special characters, and also for quickdial. You can use the alphanumeric
keyboard to dial a phone number to make a call and to press keys as
required by an Interactive Voice Response (IVR) system. Press the rele-
vant key repeatedly until the character you want is displayed.
1)
The alphanumeric keypad is set to the characters listed in the following
table.
2)
Function key Mitel 6920 SIP Mitel 6920 SIP if defined as free seat-
ing phone
Key T1 Personal Line 1 Personal Line 1
Key T2 Personal Line 2 Personal Line 2
Key T3-T20 Empty Empty
Key S1 System menu System menu
Key S2 Call forwarding menu Free seating: Log in/ Log out
Key S3 Take (pick up own call) Request a callback
Key S4 Empty Empty
Key S5 Call routing menu Empty
Key S6 Phone lock on/off Empty
Key S7 Request a callback Empty
Key S8-S18 Empty Empty
1)
Please note that actual key configuration depends on which keypad is used.
2)
Please note that the actual character selection is dependent on the language
selected.
To Next Page
Loading...
