Mitel 6920 SIP - Using Functions with Mitel Opencount

Phoning
Mitel 6920 SIP 77
eud-1763/2.0 – R6.0 – 06.2018
Initiating a call through a KT line key
You want to make a call through a KT line key.
You can call through any free KT line key. Each KT line is associated with
a call distribution element (CDE) number. This means that, by phoning,
you transmit the call number associated with the active KT line key.
Charges are accrued separately for each KT line key.
Using functions with Mitel OpenCount
Mitel OpenCount is a software package for call logging management
in communication systems and offers a clear overview over all cost
structures. The application can be integrated into your MiVoice
Office 400 communication system and enables the logging, the
administration, and the analysis of all call and connection data.
If a Mitel OpenCount is integrated into your MiVoice Office 400 com-
munication system, the following additional feature is also available
on your phone.
Pick up the handset.
➔Connection to the KT line with the highest priority.
Or:
1. Press KT line key.
➔KT line is selected.
2. Pick up the handset.
➔Connection to the selected KT line.
Enter the phone number.
Press a free KT line key.
➔The LED on the KT line key lights up. KT line is selected.
Pick up the handset.
➔The phone number is dialed.