50 Mitel 6920 SIP
eud-1763/2.0 – R6.0 – 06.2018
Phoning
As an alternative to the usual ring, your phone has a discreet ring option. If
you have activated discreet ring, the phone only rings once.
This function must be saved to a function key over the Self Service Portal
(see chapter "Configuring or deleting a key assignment", page 94).
Activating do not disturb
You do not want to receive any calls for the time being.
With the do not disturb function, you can stop calls being made to you if
you are busy or are not otherwise able to take any calls. Your phone does
not ring and is set to busy for incoming calls. Your incoming calls are auto-
matically forwarded to a call forwarding destination that has been config-
ured by your system administrator.
Your system administrator must enable this function in the MiVoice
Office 400 communication system.
This function must be saved to a function key over the Self Service Portal
(see chapter "Configuring or deleting a key assignment", page 94
).
Activating/deactivating discreet ring:
Press the function key for Discreet ring on/off.
➔The function is activated/deactivated, is displayed and the LED on the
function key lights up/does not light up.
Menu Description
Do not disturb (busy)
on/off
Your phone does not ring and is set to busy for incoming
calls.
Do not disturb (for-
warding) on/off
Your phone does not ring and is set to busy for incoming
calls. Incoming calls are automatically forwarded to a
destination that has been configured by your system
administrator.
Activating/deactivating do not disturb:
Press the function key for Do not disturb (busy) on/off or Do not disturb (forward-
ing) on/off.
➔The function is activated/deactivated, and is displayed in the status bar.
The LED on the function key lights up/does not light up. Your callers hear the
busy tone.
To Next Page
Loading...
