Mitel 6920 SIP - Page 63

Phoning
Mitel 6920 SIP 63
eud-1763/2.0 – R6.0 – 06.2018
Presence profile on/off Activate/deactivate presence profile. You can select
a presence profile (profile number 1-4, see chapter
"Controlling the presence status", page 64
).
Redkey:Trigger Actuating a redkey triggers the function configured
on the connected third party system. Contact your
system administrator for more information.
Remote maintenance
on/off
This function lets you set remote maintenance
access to your communication system permanently.
Remote maintenance
onetime on/off
This function lets you set remote maintenance
access to your communication system on a one-off
basis.
Request a callback Request a callback if the called party is busy or can-
not be reached (see chapter "Request a callback",
page 40).
Ring Alone on/off This function lets you specify which of your phones
signals incoming calls acoustically (as part of the
one-number user concept, see chapter "Activating
Ring Alone", page 54).
Run XML function You system administrator creates customer-specific
XML services (weather report, stock exchange, etc.)
which you can use on your SIP phone.Redkey:Trig-
ger
Set up conference Set up a conference with two call parties.
Show alarm state Display of the current alarm state. Contact your sys-
tem administrator to configure this function on your
phone.
Silent intrusion This function intrusion without prior notice allows you
to intrude on the call of a busy user without notifica-
tion (see chapter "Activating/answering silent intru-
sion", page 51).
Switch group x, position 2
Switch group x, position 3
This function lets you route calls and functions via
switch groups (with two switch positions).
System events Displays list of system events on your phone. For
more information about how to access the system
events on your phone, see the section "Operating
system events", page 72.
System menu Access to the MiVoice Office 400 system menu.
Take (pick up own call) Transfer a call from your phone to another phone
under the one number user concept (see chapter
"Take (pick up own call)", page 46
).
Function Description