Phoning
Mitel 6920 SIP 71
eud-1763/2.0 – R6.0 – 06.2018
Editing options for voice messages
Your display signals new voice message as follows: . The message LED
flashes red slowly.
The following options are available for further editing of the voice mes-
sages:
Notes: • Depending on the system configuration your system administrator can
specify that you are notified by e-mail whenever you receive a new
voice message (with the voice message attached). Contact your system
administrator for more information.
• To find out how to configure a voice mail, refer to chapter "Configuring
voice mail", page 90 or the user guide “User Guide Voice Mail Systems”
on the Mitel DocFinder
.
• Voice messages to another voice mailbox that you are entitled to
access are listed in the same voice mailbox as your own. You have the
same editing options.
Voice messages can be managed through the system menu, the voice
mail key, a function key (see chapter "Configuring keys", page 93
), or the
Self Service Portal (see chapter "MiVoice Office 400 Self Service Portal",
page 9).
Menu Description
Delete all Deleting all voice messages.
Greetings How to configure a voice mail greeting (see chapter
"Managing personal voice mail greeting", page 90
).
Detail Available detailed information:
• Call number / name
• Call date and time
Delete Delete voice message
Dial Call the person who left the voice message.
Forward Forward the voice message to another user. You can
decide whether to keep a copy of each voice message. A
forwarded voice message is indicated by an additional
letter which is the first letter of the softkey.
Play Play voice message.
To Next Page
Loading...
