Mitsubishi Electric AJ65BT-D62 - Page 123

MELSEC-
A
10. PROGRAMMING
10 - 45
CH.1 preset value is set.
(RWw0, RWw1): 100
Write to master station
CH.1 external preset
detection reset command
(RY20) is ON.
RY00 to RY7F is written
to Y400 to Y47F.
CH.1 count enable (RY14)
is OFF.
CH.1 external preset
detection reset command
(RY20) is OFF.
Preset command
Preset value set
Pulse count stop
Stop of counting
Remote output signal write
Downloaded from ManualsNet.com search engine