Mitsubishi Electric AJ65BT-D62 - Page 127

MELSEC-
A
10. PROGRAMMING
10 - 49
Current value reading
Current value
reading
Execution of count disable
Execution of count disable
Stop of count disable
Stop of count disable
Pulse count stop
Stop of counting
Remote output signal write
CH.1 current value
(RWr0, RWr1) is read.
CH.1 counter function
selection start command
(RY16) is ON.
CH.1 counter function
selection start command
(RY16) is OFF.
CH.1 count enable
(RY14) is OFF.
RY00 to RY7F is written
to Y400 to Y47F.
Downloaded from ManualsNet.com search engine