5. Program
5.7 Word Editing
I-202
5.7.3 Word Search
The word matching the search data is searched, and the cursor moves to the head of that word. (The
search data is not cleared.)
1) The message "SEARCH EXECUTION" appears during the search.
2) Words matching the search data are searched, starting from the word at the cursor position.
3) The cursor moves to the top of the word that was searched.
4) The search data is not cleared.
5) The screen returns to the 1st menu after the search is finished. (The search data is not cleared.)）
6) The screen returns to the 1st menu if the menu key
RETURN
is pressed.
(Note 1) The message "NO CHARACTERS" appears on the screen if the designated word cannot be
found.
(Note 2) If a word character is input in the search data after the menu key is pressed, the character will
be input after the search data buffer is cleared.
(Note 3) The search data is valid until ; (EOB). Only one block can be searched at a time.
(Note 4) The
C.B
CAN
,
SHIFT
, and
DELETE
INS
keys are invalid while the search menu is displayed.
Select a search in the upward or
downward direction.
(Ex.)
WORD
O12345678
N3 Z100.0 ;
WORD
STR.
↓
STR.
↑
RETURN
EDIT
BACK GROUND EDITING
<EDIT BUFFER>
>
O12345678
N1 G28 X0 Y0 Z0 ;
N2 G00 X100.0 ;
N3 Z100.0 ;
LOOK UP
Key input the word data to be searched.
(Ex.)
Z
1
0
0
.
0
Use the
WORD
and
WORD
keys in the
word search.
1) The cursor moves to <SEARCH DATA>.
(The edit data is not cleared.)
1) Up to 11 characters of search data can
be designated.
To Next Page
Loading...
Need help?
General
