Mitsubishi Electric EZMotion-NC E68 Series User Manual

6. Data In/Out
6.2 DATA OUTPUT
I-237
6.2.5 Outputting History Data
History data can be output. The output operation can be performed even during automatic operation.
The DATA IN/OUT 2 screen is used to output history data.
(1) History data output operation
1) Data output starts and the contents of the
output data and message "DATA OUT
EXECUTION" are displayed.
2) When tape end code % (EOR) is output, the
data output completes with message "DATA
OUT COMPLETE" displayed.
# ( 60 ) DATA ( 1000 )
<OUTPUT DATA>
%
DATA OUT COMPLETE
# ( ) DATA ( )
Press the
INPUT
key.
Set the data type to the history data.
# ( 6
0 ) DATA ( )
<OUTPUT DATA>
DATA OUT EXECUTION
# ( 60 ) DATA ( )

Mitsubishi Electric EZMotion-NC E68 Series Specifications

General

Brand	Mitsubishi Electric
Model	EZMotion-NC E68 Series
Category	Monitor
Language	English