Mitsubishi Electric MELSEC-F FX3G Series - Fx 3 U -16 Ccl-M; Fx 2 N -16 Ccl-M

296
18.1 Special Function Units/Blocks
FX3G Series Programmable Controllers
User's Manual - Hardware Edition
18 Other Extension Devices and Optional Units (External Dimensions and Terminal Arrangement)
18.1.13 FX3U-16CCL-M
External Dimensions, Terminal Layout
• MASS(Weight): Approx. 0.3kg (0.66lbs)
• Installation: DIN rail of 35mm (1.38") in width or screws
• Accessories: Label for indication of special unit/block number,
Terminal resistor : 2 resistors for CC-Link dedicated cable/2 resistors for CC-Link dedicated
high-performance cable, Dust Proof sheet, Manual supplied with product
• Terminal block: M3 screws for power supply terminal, CC-Link connection terminal
M3.5 screws for CC-Link connection terminal block mounting screws (black)
• The extension cable is already connected to the extension block
18.1.14 FX2N-16CCL-M
External Dimensions, Terminal Layout
• MASS(Weight): Approx. 0.4kg (0.88lbs)
• Installation: DIN rail of 35mm (1.38") in width or screws
• Accessories: Label for indication of special unit/block number,
Terminal resistor : 2 resistors for CC-Link dedicated cable/2 resistors for CC-Link dedicated
high-performance cable, Manual supplied with product
• Terminal block: M3 screw for power supply terminal, M3.5 screw for signal terminal
• The extension cable is already connected to the extension block
87(3.43")
90(3.55")
Unit:mm (inches)
4(0.16")
9(0.36")
55(2.17")
2- 4.5 mounting holes
80(3.15")
(mounting hole pitch)
DG SLD
DA DB
24+
24-
87(3.43")
80(3.15")
(mounting hole pitch)
90(3.55")
Unit:mm (inches)
75(2.96")
(mounting hole pitch)
9(0.36")
85(3.35")
2-
4.5 mounting holes
24+
24-
SLDFG DG DA DB