Mitsubishi Electric MELSEC iQ-R Series - Page 74

2 - 42
2. DETAILS OF MIGRATION FROM Q17nCPUN(-T) TO RnMTCPU
(3) Procedures for system parameter diversion by MELSOFT MT Developer2
MELSOFT GX Works3 system parameters need to be diverted to R series common
parameter settings (comparable to the basic settings of Q series).
The following is the diversion procedure.
1) Start MELSOFT MT Developer2. Select “System Parameter Diversion” from “Project”
menu to open the “System Parameter Diversion” screen.
2) Click “System Parameter Diversion”.