Mitsubishi Electric MELSEC iQ-R Series - Page 61

5 SAFETY APPLICATION CONFIGURATION EXAMPLES
5.1 System Configured by a Safety CPU
59
5
Required Settings
Set the station type, network number, and parameters of the CC-Link IE Field Network master/local module. Display the
required settings. Then, select and input parameters as shown below. Complete the input. Then, click the [Apply] button in the
lower right of the window.
Window
Displayed items
*1 Station number setting method and parameter setting can be selected by setting "Parameter Editor" and "Program". Here, set the
"Parameter Editor".
Setting classifications CCIEF master (1)
Required Settings Station Type Master Station
Network Number 1
Setting Method for Station Numbers Set parameters
*1
Station No. 0
Parameter Setting Method Set parameters
*1