60
5 SAFETY APPLICATION CONFIGURATION EXAMPLES
5.1 System Configured by a Safety CPU
Basic settings
Set the network configuration settings and other parameters of the CC-Link IE Field Network master/local module. Display the
basic settings. Then, select and input parameters as shown below. Complete the input. Then, click the [Apply] button in the
lower right of the window. When setting "Network Configuration Settings", double-click the line of the network configuration
setting in the setting item window, or click the right-side button to be displayed when selecting the line.
Setting classifications CCIEF master (1)
Basic Settings Network Configuration Settings Refer to Network Configuration Settings.
Refresh Settings Refer to Refresh Settings.
Network Topology Line topology, star topology, or both are used
Operation setting when the master station is returned
(settable only when setting the submaster station in a
network configuration)
Return as Master Operation Station
To Next Page
Loading...
