Mitsubishi Electric MELSEC iQ-RJ71C24-R4 - Page 535

APPENDICES APPENDIX
Appendix 5 Operation Image and Data Structure of Predefined Protocol
533
A
■Data example
The following table shows send data when a packet consists of [Header], [Conversion variable], [Terminator] and data stored
in the data storage area is D0=837 (0345H), D1=18 (0012H). (Reference: 120345H =1180485 in decimal form)
• Data example 1
*1 The "_" indicates a space.
• Data example 2
*1 '_' indicates a blank.
Item Setting contents
Fixed number of data/Variable
number of data
Fixed number of data Fixed number of data Fixed number of data
Number of Send Data 1 1 1
Start address of data storage area D0 D0 D0
Conversion unit Word Word Word
Conversion HEX  ASCII decimal HEX  ASCII decimal HEX  ASCII decimal
Number of Send Digits of Data 5 5 Variable number of digits
Blank-padded character 0 Space (Not applicable)
Sign Unsigned Signed Signed
Sign character (Not applicable) + +
Number of decimals No decimal point 2 No decimal point
Delimiter No delimiter Comma Comma
Send data
*1
[Header]00837[Terminator] [Header]+_ _ 8.37, [Terminator] [Header]+837, [Terminator]
Item Setting contents
Fixed number of data/Variable
number of data
Fixed number of data Fixed number of data Fixed number of data
Number of Send Data 1 2 2
Start address of data storage area D0 D0 D0
Conversion unit Double word Word Word
Conversion HEX  ASCII decimal HEX  ASCII decimal HEX  ASCII decimal
Number of Send Digits of Data 10 5 5
Blank-padded character 0 Space 0
Sign Signed Unsigned Signed
Sign character + (Not applicable) +
Number of decimals 8 No decimal point 2
Delimiter No delimiter No delimiter Comma
Send data
*1
[Header]+00.01180485[Terminator] [Header]_ _ 837 _ _ _18[Terminator] [Header]+008.37, +000.18[Terminator]