Front Height and Rear Height Adjusting Structure
The front and rear portions of the seat cushion can be
raised and lowered independently. If the front height and
rear height switch is pushed to the UP side, motor
revolutions will be transferred to gear A to gear B to
sector gear. Since the sector gear, shaft and arm are
fixed, the seat cushion rises continuously (stepless) along
with the revolution of the sector gear.
s the seat cushion continues to rise, the claw on the
shaft turns the limit switch from ON to OFF, cutting off
power to the motor and stopping it.
In addition, if the front height and rear height switch is
pushed to the DOWN side, operation is reversed with
the motor revolving in the opposite direction and
lowering the seat cushion.
6-6 INTERIOR - Seats
To Next Page
Loading...
