Slide Adjustment Structure
The motor and support A are fixed to the upper rail, and the nut
housing is attached to the lower rail.
When the motor rotates, the worm gear drives the screw to shift the
upper rail forward or backward. This controls the forward/backward
seat sliding.
When the seat cushion reaches the forward or backwards limit, the
upper rail pushes the limit switch on the lower rail to turn it OFF, and
the motor stops.
INTERIOR - Seats 6-7
RECLINING ADJUSTMENT MECHANISM WITH MEMORY
If the seatback is raised after being inclined to the front,
it can be returned to the original angle set in memory by
previously setting the seatback angle in memory.
Furthermore, even after it is reclined at any angle, if the
seatback is raised after being inclined to the front, it can
be returned to the original angle set in memory.
The construction and operation is the same as that for the '91
PAJERO.
To Next Page
Loading...
