Refer to “Returning to the factory set-
tings” on page 5-25.
Changing the reset mode for
average fuel consumption and
average speed
E00522900845
The mode conditions for the average fuel
consumption and average speed display can
be switched between “Auto reset” and “Man-
ual reset”.
1. Press and hold the multi-information
meter switch for about 2 seconds or
more to switch from the setting mode
screen to the menu screen.
Refer to “Changing the function settings
(when the ignition switch or the opera-
tion mode is ON)” on page 5-19.
2. Lightly press the multi-information me-
ter switch to select “AVG” (average fuel
consumption and average speed setting).
3. Press and hold the multi-information
meter switch for about 2 seconds or
more to switch in sequence from A or 1
(Auto reset mode) → M, 2 or P (Manual
reset mode) → A or 1 (Auto reset
mode).
The setting is changed to the selected
mode condition.
Manual reset mode
l
When the average fuel consumption and
average speed are being displayed, if
you hold down the multi-information
meter switch, the average fuel consump-
tion and average speed displayed at that
time are reset.
l
When the following operation is per-
formed, the mode setting is automatical-
ly switched from manual to auto.
[Except vehicles equipped with keyless
operation system]
Turn the ignition switch from the
“ACC” or “LOCK” position to the “ON”
position.
[For vehicles equipped with the keyless
operation system] Change the operation
mode from ACC or OFF to ON.
Switching to auto occurs automatically.
If switching to manual mode is done,
however, the data from the last reset is
displayed.
Auto reset mode
l
When the average fuel consumption and
average speed are being displayed, if
you hold down the multi-information
meter switch, the average fuel consump-
tion and average speed displayed at that
time are reset.
Multi-information display
5-20
OGAE15E5
Instruments and controls
5
To Next Page
Loading...
Need help?
General
