For ordinary demisting
Perform the following settings to prevent
misting of the windscreen and door windows,
and to heat the leg area.
Heater/Manual air conditioning
Automatic air conditioning
1.
Set the air selection switch (A) to the
outside position.
2. Set the mode selection dial to the “ ”
position.
3. Select your desired blower speed by
turning the blower speed selection dial.
4. Select your desired temperature by turn-
ing the temperature control dial.
5. On vehicles with air conditioning, push
the air conditioning switch (B).
For quick demisting
Heater/Manual air conditioning
Automatic air conditioning
1. Set the mode selection dial to the “ ”
position.
2. Set the blower to the maximum speed.
3. Set the temperature to the highest posi-
tion.
NOTE
l
When the mode selection dial is in the “ ”
position, the system operates automatically
and outside air is set automatically.
l
To demist effectively, direct the air flow
from the side ventilators towards the door
windows.
NOTE
l
On vehicles with air conditioning, do not set
the temperature control dial to the max. cool
position. Cool air will blow against the win-
dow glasses and prevent demisting.
l
For vehicles with the Auto Stop & Go
(AS&G) system, if the mode selection dial is
set to the demister position shown in the il-
lustration, the Auto Stop & Go (AS&G) sys-
tem will not operate and the engine will not
stop automatically even if the vehicle is
stopped. This is to ensure that good visibility
is maintained.
Heater/Air conditioning
7-10
OGAE15E5
For pleasant driving
7
To Next Page
Loading...
