Adjusting the color purity (cont.)
_Important:
O Turn the TV on, and check the color performance.
If a discolored patch still exists, change the STRENGTH switch
to the other position. If' there is still impurity, wait a few
minutes, then press the :DEGAUSS butLon on the co:atrol panel.
You may need to adjust the color pur!Lty switches if you change
position or location.
If there is still color impurity after ac[justing the switches,
please contact your Mitsubishi Authcri:_ed Warranty Center.
Color impurity can also be caused by un,_h:ielded speakers and
strong magnets. Move these items away from your TV.
38 Chapter 3: Operating Your TV
To Next Page
Loading...
Need help?
General
