Understanding the On-Screen Displays
Your TV provides an on-screen suinmary of the current settings for
the TV or cable channels, as well as tlte information related to
Extended Data Services (X_DS). XDS allows broadcasters to supply
you with the current time, channel information (such as call letters
and the network name), and program information (such as the
program name and program description). To view this information,
press the information button (INFO) on the remote control.
You will see a display like
this if your main source is
an antenna:
network namel 023 ESPN
Stereo & SAP
SQV QV
023
I program name! 1
program description
Thursday 10:23 am
This setting shows:
• channel number (23),
• this channel's call letters or
name,
• stereo and SAP are available,
• this channel is programmed
into SuperQuickView memory,
• PIP input source,
• the day of the week and the
time.
You will see a display like
this if your main source is
an input:
Inetwork name] Input-I
S-VIDEO
023
I program name[
[ program descril_tion l
Thursday 10:23 am
This setting shows:
• the input name (Input-l),
• an S-video cable is connected,
• PiilP input source,
• current day of the week, and
• time.
This also shows where the
network name, program name
and program description will
appear if the broadcaster is
supplying the information via
XDS.
The on-screen displays will
automatically disappear after
about 5 seconds.
80 Chapter 4: Using the Special Features
To Next Page
Loading...
Need help?
General
