Selecting the input source
If you connected components such as VCRs, camcorders, or
]aserdisc players to your _f_, you will _e_d to change the input
source to view the signals from these components.
To select an input source, press the inpul; button (INPUT) on the
control panel or on the remote control.
ooo
ooo
cZ_
CZ_I C2Z? C2221_
t22_ _ C23
You can choose between the following input sources:
• TV channels
• The source connected to the Input (CS-32207, CS-35207), or the
sources connected to Input 1 and Input 2 (all other models)
The name of the input you have selected will display briefly in the
corner of the screen.
Getting Started 41
To Next Page
Loading...