Setting the timer
This special feature allows you to program the TV to turn on
automatically at a time that you set. To set the timer:
[] TV Main Menu
[] First Time Setup
[] Customize Display
_] Advanced Features
[] Select AN Memory
'_-] ADJUST to select
ENTER to enter
MENU to exit menus
_] Advanced Features
[] Set the Timer
[] Use Parental Lock
[] Use SuperQuickView
_ ADJUST to select
ENTER to enter
MENU to go back
q[])Press the MENU button on the
remote control. The Main Menu
will appear on the screen.
O Use 1;he ADJUST buttons to
select "Advanced Features."
Press ENTER.
O You will see the "Advanced
Feat ares" screen. Use the
ADJUST buttons to select
"Set the Timer." Press ENTER.
O Use 1:;heADJUST buttons and
the ENTER button to set Day
(Mon-to-Fri, Everyday, Sun-
Sat), Start time, and Channel.
After setting the timer, the indica-
tor will blink in green when the
TV i,_turned off.
[] Set the Timer
__]Day : Sunday
Start time : - - : ....
[]Channel :---
[_-] ADJUST to select
ENTER to enter
MENU to go back
If you press the CANCEL button
while setting the timer, the arrow
will move to the previous item. To
clear the timer, press CANCEL
with the arrow next to "Day."
_Important:
When the timer turns the TV on, the display will flash. If you do
not press any function buttons for about 5 minutes, the TV will
automatically turn off. Press a function button (such as the display
button) to keep the TV on and turn off the flashing display.
72 Chapter 3: Operating Your TV
To Next Page
Loading...
Need help?
General
