Customizing the A/V Memory position (cont.)
The Background fhnction allows yoa to select the background
color from choices of "Black" or "Gray" for the closed caption
display and the audio/video functions display.
The _ function is used to control the closed caption decoder. For
details, see Using the closed caption decoder in this chapter.
adjusting the video functions
You can adjust the video settings fbr any A/V memory position
using the MENU or VIDEO buttons on the remote control.
access with the MENU button
_] Video Function
Standard
[] Tint
[] Color
[] Contrast
_r_ Brightness _
Sharpness
[] Notch filter : Off
[] Color temp : Middle
[] Background : Black
[] c_. : When muting
O Press the MENU button on the
remote control. The TV Main
Menu appears on the screen.
Use the AD,YLIST buttons to
select "Select A/V Memory."
Press ENTER.
The four A/V memory positions
appear. Select the A/V position
to adjust by pressing the
ADJUST up/down buttons.
When the desired position is
selected, press ENTER.
_]PThe video settings for the
selected A/V memory position
display. Use the ADJUST up/
down buttons to select the
setting to change and press
ENTER.
The setting ,appears at the
bottom of the screen.
While the function is still on the screen, use the ADJUST right/
left buttons to adjust the function's setting.
The functions will disappear from the screen after a few sec-
onds. (You cannot adjust a function if it is not on the screen.)
64 Chapter 3: Operating Your TV
To Next Page
Loading...
Need help?
General
