_Important:
_Important:
Customizing the A/V Memory position (cont.)
adjusting the closed caption decoder
You can access the closed caption decoder screen using the MENU
or VIDEO button. When adjusting the closed! caption decoder, you
can use the buttons on the remote control.
'Q O ,..
ooo_J
GOOd.
0 O 0[_4
_] Audio Function
Standard
[] Listen to : Stereo
[] Bass _
[] Treble _
[] Balance _:mii::=
[] Surround : Simulate
[] Speaker : Off
access wit:h the MENU button
O Press the MENU button on the
remote control. The TV Main
Menu will appear on the screen.
O Use the ADJUST buttons to
select S,.lect A/V Memory."
Press ENTER.
Select the closed caption display
by pressing the ADJUST up/
down bur.tons. Press the adjust
right or left button.
access with the VIDEO button
O Press the VIDEO button until
the closed caption :menu option
displays.
Press the ADJUST right/left
buttons to select the desired
closed[ caption signal.
(See the previous page for an explanation of the caption settings.)
If you set the decoder to a "text" setting and tune to a broadcaster
that is not sending a text signal, a large black rectangle will appear
on your screen. Press the HOME button to make the rectangle
disappear.
If you cannot display any captions on the screen, please keep in
mind that not all broadcasters, video tapes, or laserdiscs supply
closed caption signals.
Additionally, captions might not appear:
• if you are playing a video tape that is worn or deteriorated, or
• if you are starting to play a laserdisc i¥om still or search mode.
Getting Started 67
To Next Page
Loading...
Need help?
General
