Mitsubishi ECLIPSE CROSS 2017 User Manual

Information screen (when the
ignition switch is turned from
the “LOCK” position to the
“ON” position or the operation
mode is changed from OFF to
ON)
E00520702188
When the ignition switch is turned to the
“ON” position or the operation mode is put in
ON, the display screen switches in the fol-
lowing order.
*: When the inspection time has arrived
1. Screen when the ignition switch or the
operation mode is OFF
2. System check screen ® p. 5-10
3. Screen when the ignition switch or the
operation mode is ON
4. Service reminder ® p. 5-09
Information screen (when the
ignition switch or the operation
mode is ON)
E00521102062
Press the
switch or switch to switch the
display screen in the following order.
*
1
: When there is no warning display
*
2
: When there is a warning display
1-
Tripmeter ® p. 5-08
2-
Tripmeter ® p. 5-08
3- Driving range display ® p. 5-10
ECO drive assist display ® p. 5-12
4- Average fuel consumption display
® p. 5-11
ECO drive assist display ® p. 5-12
5- Average speed display ® p. 5-11
Instant fuel consumption display
® p. 5-11
6- Auto Stop & Go (AS&G) monitor
® p. 5-12
ECO score display ® p. 5-13
7- S-AWC (Super-All Wheel Control) op-
eration display* ® p. 6-39
8- Service reminder ® p. 5-09
9- Function setting screen ® p. 5-13
10- Redisplay of a warning display screen
® p. 5-06
NOTE
l
While driving, the service reminder are not
displayed even if you operate the multi-in-
formation display switches. Always stop the
vehicle in a safe place before operating.
Multi-information display
5-05
OGKE18E1
Instruments and controls
5

Mitsubishi ECLIPSE CROSS 2017 Specifications

General

Brand	Mitsubishi
Model	ECLIPSE CROSS 2017
Category	Automobile
Language	English