Screen Cause Solution (Reference)
l
There is a fault in the Adaptive Cruise
Control System (ACC).
l
We recommend you to have it checked.
Refer to “To terminate ACC control” on
page 6-74.
l
Foreign objects, such as dirt, snow or ice,
adhere to the bumper surface around the
sensor.
l
Remove a foreign object on the bumper
surface around the sensor. When the
warning display does not disappear after
having cleaned the bumper surface around
the sensor, contact a MITSUBISHI
MOTORS Authorized Service Point.
Refer to “To terminate ACC control” on
page 6-74.
l
There is a fault in the Forward Collision
Mitigation system (FCM).
l
We recommend you to have it checked.
Refer to “FCM braking function” on page
6-80.
l
Foreign objects, such as dirt, snow or ice,
adhere to the bumper surface around the
sensor.
l
Remove a foreign object on the bumper
surface around the sensor.
When the warning display does not disap-
pear after having cleaned the bumper sur-
face around the sensor, contact a
MITSUBISHI MOTORS Authorized
Service Point.
Refer to “Forward Collision Mitigation
system (FCM): System problem warn-
ing ” on page 6-84.
Indication lamp, warning lamp, and information screen display list
5-35
OGKE18E1
Instruments and controls
5
To Next Page
Loading...
