Screen Cause Solution (Reference)
l
The Ultrasonic misacceleration Mitigation
System (UMS) sensor is temporarily not
available for some reason such as the en-
vironmental condition or increase of the
sensor temperature.
l
When the warning display does not disap-
pear after waiting for a while, contact a
MITSUBISHI MOTORS Authorized
Service Point.
Refer to “Ultrasonic misacceleration Miti-
gation System (UMS)*: Warning display”
on page 6-94.
l
The Ultrasonic misacceleration Mitigation
System (UMS) does not operate normally
because there are some malfunctions in
the sensor or the system.
l
We recommend you to have it checked,
immediately.
Refer to “Ultrasonic misacceleration Miti-
gation System (UMS)*: Warning display”
on page 6-94.
Indication lamp, warning lamp, and information screen display list
5-37
OGKE18E1
Instruments and controls
5
To Next Page
Loading...
