Screen Cause Solution (Reference)
l
The Ultrasonic misacceleration Mitigation
System (UMS) is activated.
l
Refer to “Ultrasonic misacceleration Miti-
gation System (UMS)*” on page 6-89.
l
The Blind Spot Warning (BSW) sensor is
temporarily not available for some reason
such as the environmental condition or in-
crease of the sensor temperature.
l
When the warning display does not disap-
pear after waiting for a while, contact a
MITSUBISHI MOTORS Authorized
Service Point.
Refer to “Blind Spot Warning (BSW) ” on
page 6-95.
l
The Blind Spot Warning (BSW) does not
operate normally because there are some
malfunctions in the sensor or the system.
l
We recommend you to have it checked,
immediately.
Refer to “Blind Spot Warning (BSW) ” on
page 6-95.
Indication lamp, warning lamp, and information screen display list
5-38
OGKE18E1
Instruments and controls
5
To Next Page
Loading...
