Screen Cause Solution (Reference)
l
Foreign objects, such as dirt, snow or ice,
adhere to the bumper surface around the
sensor.
l
Remove a foreign object on the bumper
surface around the sensor.
When the warning display does not disap-
pear after having cleaned the bumper sur-
face around the sensor, contact a
MITSUBISHI MOTORS Authorized
Service Point.
Refer to “Blind Spot Warning (BSW):
When there is a foreign object on the sen-
sor ” on page 6-98.
l
The Rear Cross Traffic Alert (RCTA) has
detected a vehicle that is approaching
your vehicle.
l
Pay special attention to the rear of your
vehicle.
Refer to “Rear Cross Traffic Alert
(RCTA) ” on page 6-99.
l
There is a fault in the sensor.
l
We recommend you to consult a
MITSUBISHI MOTORS Authorized
Service Point.
Refer to “Forward Collision Mitigation
system (FCM): System problem warn-
ing ” on page 6-84.
Refer to “Lane Departure Warning
(LDW): System problem warning” on
page 6-101.
Refer to “Automatic High-Beam (AHB):
System problem warning” on page 5-60.
Indication lamp, warning lamp, and information screen display list
5-39
OGKE18E1
Instruments and controls
5
To Next Page
Loading...
