Screen Cause Solution (Reference)
l
The Forward Collision Mitigation system
(FCM), Lane Departure Warning (LDW)
and Automatic High-Beam (AHB) are
temporarily unavailable due to the high or
low temperature of the sensor.
l
After the temperature of the sensor has
been in range, the system will automati-
cally return to operation.
Refer to “Forward Collision Mitigation
system (FCM): System problem warn-
ing ” on page 6-84.
Refer to “Lane Departure Warning
(LDW): System problem warning” on
page 6-101.
Refer to “Automatic High-Beam (AHB):
System problem warning” on page 5-60.
l
The sensor is temporarily unavailable due
to conditions such as the adhesion of con-
taminants to the sensor or windscreen.
This is not a malfunction.
l
Refer to “Forward Collision Mitigation
system (FCM): System problem warn-
ing ” on page 6-84.
Refer to “Lane Departure Warning
(LDW): System problem warning” on
page 6-101.
Refer to “Automatic High-Beam (AHB):
System problem warning” on page 5-60.
l
There is a fault in the system of the auto-
matic high-beam.
l
We recommend you to consult a
MITSUBISHI MOTORS Authorized
Service Point.
Refer to “Automatic High-Beam (AHB):
System problem warning” on page 5-60.
l
There is a fault in the Auto Stop & Go
(AS&G) system.
l
Refer to “Auto Stop & Go (AS&G) sys-
tem” on page 6-24.
Indication lamp, warning lamp, and information screen display list
5-40
OGKE18E1
Instruments and controls
5
To Next Page
Loading...
